Make a Pyramid Box
This is an unusual box that can be used for small or large gifts. There are three downloadable templates to choose from, a large template or two small templates that will fit on a sheet of A4 card, and one small template that fits on a sheet of A5 card. There are two sets of templates for each size, one with the dotted fold lines on (this is great to practice on with a sheet of paper, or if children are making the box), and one with no dotted fold lines (these are harder to use but give a more professional finish). These boxes are easy to make with no gluing required and can be used for a variety of gift ideas including favours at a wedding or for small gifts hanging from a Christmas tree. The larger pyramid measures nearly 8 cm across the base and 4½ cm high, the small pyramid base is 5¼ cm wide and 3 cm high.
You will need:
Scissors
Craft knife or bone folder
Ruler
Hole punch
Ribbon
What to do
1. Download the template onto card, or onto paper and trace the design onto card. Remember there are two sets of templates for each size, one with the dotted fold lines (this is great to practice on with a sheet of paper, or if children are making the box), and one with no dotted fold lines (these are harder to use but give a more professional finish).
Download Large Pyramid Box Template
Download Large Pyramid Top Template without dotted lines
Download single small Pyramid Box A5 Template
Download single small Pyramid Box A5 Template without dotted lines
Download two small Pyramid Boxes A4 Template
Download two small Pyramid Boxes A4 Template without dotted lines
2. Cut out the template.
3. Score the fold lines using either a craft knife or bone folder and ruler, if you are using a craft knife, do not cut through the card. The scoring is just to help the card to fold.
4. Punch a hole where marked near the top of each triangle.
5. Fold over the sides and narrow flaps, pressing with your finger to make crisp folds.
6. Put the small gift into the box and close the top of the pyramid with ribbon. Take a ribbon end and thread it through the punched holes. Start by threading from the front of one hole into the box then through the next hole from inside to outside the box, go into the third hole from the outside and then thread through the last hole from the inside to the outside. Tie the two ribbon ends together with a slip knot and finish with a bow.
7. If you need to make a loop to hang the pyramid up by (Christmas tree decoration) then after threading the ribbon through all four holes and tying the ends together with a slip knot, thread the ribbon back through the box, under the ribbon making a loop, tie another slip knot and finish off with a bow, this can be a little tricky so another pair of hands may come in handy. Or, after tying a bow to close the top, thread a separate piece of ribbon through and tie a knot to make a loop.
Back to the Paper and Card projects menu...